Special Fittings
3/8” STAINLESS FLARED CAP NUT (QUANTITY/5)
$13.57
3/8” STAINLESS FLARED CAP NUT (QUANTITY/5)This stainless cap is made of a pure 304 stainless steel. It is highly recommended to use a 3/8” flare washer inside the cap nut...
1/4” STAINLESS FLARED CAP NUT (QUANTITY/5)
$6.49
1/4” STAINLESS FLARED CAP NUT (QUANTITY/5)This stainless cap is made of a pure 304 stainless steel. It is highly recommended to use a 1/4” white flare washer inside the cap...
FLOJET SYRUP OUT x 3/8” BARB FITTING (QUANTITY/4)
$17.46
FLOJET SYRUP OUT x 3/8” BARB FITTING (QUANTITY/4)This high quality, yet heavy duty 3/8” out is made of pure 304 stainless steel. The sharp barbed teeth grab the flex line...
1/4” BARB PLUG, NYLON (QUANTITY/5)
$2.36
1/4” BARB PLUG, NYLON (QUANTITY/5)This nylon plug is made of a special polyethelene blend. The sharp barbed teeth grab the flex line firmly and tight without slipping. A 1/4” clamp...
3/8” BARB PLUG, NYLON (QUANTITY/5)
$2.36
3/8” BARB PLUG, NYLON (QUANTITY/5)This nylon plug is made of a special polyethelene blend. The sharp barbed teeth grab the flex line firmly and tight without slipping. A 3/8” clamp...
FLOJET SYRUP OUT x 1/4” BARB FITTING (QUANTITY/4)
$17.46
FLOJET SYRUP OUT x 1/4” BARB FITTING (QUANTITY/4)This high quality, yet heavy duty 1/4” out is made of pure 304 stainless steel. The sharp barbed teeth grab the flex line...
1/4” SWIVEL NUT x 3/8” BARB, STAINLESS (QUANTITY/4)
$11.80
1/4” SWIVEL NUT x 3/8” BARB, STAINLESS (QUANTITY/4)This high quality, yet heavy duty swivel nut adaptor is made of pure 304 stainless steel. It is designed to connect a 1/4”...
FITTING BIB GAS IN ELBOW, SHURFLO PUMP (QUANTITY/4)
$10.62
FITTING BIB GAS IN ELBOW, SHURFLO PUMP (QUANTITY/4)This valved gas in fitting has a 1/4 barb end to hook up to. When you remove this fitting from the pump, the...
Cold Plate Fitting Male Flare 1/2”-16 x 3/8” Barb (QUANTITY/5)
$12.69
Cold Plate Fitting Male Flare 1/2”-16 x 3/8” Barb (QUANTITY/5)This high quality, yet heavy duty cold plate fitting is made of pure 304 stainless steel. The 1/2”-16 male flare threads...
FITTING BIB 3/8 BARB ELBOW SYRUP OUT, SHURFLO PUMP (QUANTITY/4)
$16.11
FITTING BIB 3/8 BARB ELBOW SYRUP OUT, SHURFLO PUMP (QUANTITY/4)This fitting has a heavy duty O-Ring enabling you to swivel it without leaking. It has a 3/8 barb end to...
FITTING BIB GAS IN TEE, SHURFLO PUMP (QUANTITY/4)
$13.92
FITTING BIB GAS IN TEE, SHURFLO PUMP (QUANTITY/4)This valved gas in fitting has a 1/4 barb end on two sides. When you remove this fitting from the pump, the valved...
FITTING BIB GAS IN TEE, FLOJET PUMP (QUANTITY/4)
$27.61
FITTING BIB GAS IN TEE, FLOJET PUMP (QUANTITY/4)This valved gas in fitting has a 1/4 barb end on both sides. When you remove this fitting from the pump, the valved...
CO2 TANK NUT, BRASS FOR REGULATOR (QUANTITY/2)
$5.92
CO2 TANK NUT, BRASS FOR REGULATOR (QUANTITY/2)This brass nut attaches to the CO2 tank by means of an adjustable wrench. It is not recommended to use channel locks to tighten...
1/4” MALE FLARE x 1/4” BARB, STAINLESS ADAPTOR (QUANTITY/4)
$8.64
1/4” MALE FLARE x 1/4” BARB, STAINLESS ADAPTOR (QUANTITY/4)This high quality, yet heavy duty connecting adaptor is made of pure 304 stainless steel. The 1/4” male flare threads into a...
1/4” BARB INLET FITTING, DOUBLE O-RING, STAINLESS (QUANTITY/4)
$20.28
1/4” BARB INLET FITTING, DOUBLE O-RING, STAINLESS (QUANTITY/4)This high quality, yet heavy duty inlet stem is made of pure 304 stainless steel. This fitting is primarily used behind most valve...
FITTING BIB 1/4 BARB ELBOW SYRUP OUT, SHURFLO PUMP (QUANTITY/4)
$11.94
FITTING BIB 1/4 BARB ELBOW SYRUP OUT, SHURFLO PUMP (QUANTITY/4)This fitting has a heavy duty O-Ring enabling you to swivel it without leaking. It has a 1/4 barb end to...
Cold Plate Fitting Male Flare 1/2”-16 x 1/4” Barb (QUANTITY/5)
$12.69
Cold Plate Fitting Male Flare 1/2”-16 x 1/4” Barb (QUANTITY/5)This high quality, yet heavy duty cold plate fitting is made of pure 304 stainless steel. The 1/2”-16 male flare threads...
RIGHT HAND CO2 STEM, FOR TAPRITE REGULATOR, BRASS (QUANTITY/2)
$5.92
RIGHT HAND CO2 STEM, FOR TAPRITE REGULATOR, BRASS (QUANTITY/2)This brass stem slips through the CO2 brass nut and screws into the chassis of the regulator on one end and attaches...
LEFT HAND CO2 STEM, FOR REGULATORS, BRASS, (QUANTITY/2)
$5.92
LEFT HAND CO2 STEM, FOR REGULATORS, BRASS, (QUANTITY/2)This brass stem slips through the CO2 brass nut and screws into the chassis of the regulator on one end and attaches to...
FITTING BIB GAS IN STRAIGHT, FLOJET PUMP (QUANTITY/4
$19.82
FITTING BIB GAS IN STRAIGHT, FLOJET PUMP (QUANTITY/4)This valved gas in fitting has a 1/4 barb end to hook up to. When you remove this fitting from the pump, the...
FITTING BIB GAS IN ELBOW, FLOJET PUMP (QUANTITY/4)
$27.85
FITTING BIB GAS IN ELBOW, FLOJET PUMP (QUANTITY/4)This valved gas in fitting has a 1/4 barb end to hook up to. When you remove this fitting from the pump, the...
© 2021 sodapartsexpress.com.
